Link/Gateway installation and safety notes

Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the encoder and in this guide before operating the unit.

All deployments of an Link/Gateway unit should ensure that the device is not mounted:

Within explosive zones
Within 0.5m of a powered transmitter and/or receiver antenna
Within the engine bay/compartment of a vehicle
Within 1m of a vehicle fuel fill point (direct line of sight)
Near heat sources or in direct sunlight

The following precautions must be taken to avoid damage to the unit:

DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY
Only ever use the external power supply provided with the product. If the external power supply needs replaced, only ever use a power supply from the manufacturer
Employ suitable mains filtering if voltage spikes are likely
Unplug the EdgeVis Video Router during lightning storms or when unused for long periods of time
Do not reverse the polarity of the DC power supply. It will cause irreparable damage to the EdgeVis Video Router
Do not modify the unit, it may violate the regulatory compliance and may induce safety hazards
The mains power cord must be connected to a socket-outlet with an earthing connection

Important Safety Instructions

Only use approved accessories.
Avoid contact with liquid, keep dry. Do not expose the unit to rain or moisture.
Avoid extreme temperatures.
Do not block the fan exhaust.
Do not dispose of in a fire.
Do not attempt to disassemble.
Only use approved accessories.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment maybe impaired.
There are no user serviceable parts. To prevent electric shock or fire hazard, do not remove cover.
Refer all servicing to qualified service personnel. Servicing is required when the encoder has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the encoder, the encoder has been exposed to rain or moisture, does not operate normally, or has been dropped.

Product Handling

Always treat your device and its accessories with care and keep it in a clean, dust-free place.
Do not expose your device or its accessories to open flames or lit tobacco products.
Do not expose your device or its accessories to liquid, moisture or high humidity.
Do not drop or throw or your EdgeVis Video Router or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the EdgeVis Video Router or its accessories.
Do not paint your EdgeVis Video Router or its accessories.
Please check local regulations for disposal of electronic products.

Electrostatic discharge (ESD)

Do not touch the SIM card’s metal connectors.

Medical

This device may interfere with the operation of some pacemakers, hearing aids or other medical devices. To reduce risk, maintain a separation distance at least 20cm between the device and the medical device. Refer to the medical device for additional information.

Battery

The device contains a small Lithium coin cell battery. Risk of explosion if the battery is replaced with an incorrect type.

RF Energy

Antenna

Do not unnecessarily touch the RF antenna.

Limiting exposure to radio frequency (RF) fields

To ensure compliance with RF exposure guidelines the EdgeVis Video Router must be used with a minimum of 20 cm separation from the body

Environmental usage

This device has been designed for use in indoor environments. It can operate in temperatures from 0˚C to +35˚C

Explosive environments and fire

Petrol stations and explosive atmospheres

This device is not to be used in locations with potentially explosive atmospheres, all posted signs to turn off wireless devices must be obeyed.

Areas with potentially explosive atmospheres include but are not limited to; fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders

Blasting Caps and Areas

This device is not to be used in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.

Hot Temperatures

This device has an active cooling fan, the exhaust vents will expel hot air. Do not block or touch the exhaust.

Link/Gateway out-of-the-box set up

Link/Gateway connectors and operation

MiniCam hardware installation guide